Shindaiwa EB8520RT Betreibershandbuch PDF herunterladen (Seite 23)

Maintenance and care

Servicing guidelines

Maintenance and care

Cleaning air filter

Tools required: 25-50 mm (1-2 in.) Cleaning brush

Parts required: Air filter

1. Close choke ( ). This prevents dirt from entering the car-

burettor throat when the air filter is removed. Brush accumu-

lated dirt from air cleaner area.

2. Remove air filter cover by loosening thumb screw. Brush dirt

from inside cover.

3. Remove and inspect pre-filter. If pre-filter is torn or otherwise

damaged, replace it with a new one.

4. Clean pre-filter with soap and water. Let dry before reinstall-

ing.

5. Inspect air filter element, If element is damaged or distorted,

replace it with a new one.

6. Tap filter gently on a hard surface to dislodge debris from el-

ement or use compressed air from the inside to blow debris

out and away from air filter element.

7. Install air filter element, pre-filter and cover in the reverse or-

der of removal.

Area Maintenance Page Before use Monthly

Air filter Inspect/Clean/Replace 21 •

Fuel filter Inspect/Replace 22 •

Spark plug Inspect/Clean/Adjust/Replace 24 •

Carburettor Inspect 22 •

Cooling system Inspect/Clean 23 •

Exhaust system Inspect/Tighten/Clean 23 •

Starter Inspect - •

Fuel system Inspect - •

Screws, bolts and nuts Inspect/Tighten/Replace - •

IMPORTANT

Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.

If you have any questions or problems, please contact your shindaiwa dealer.

1. Air filter cover

3. Pre-filter

2. Thumb screw

4. Air filter element

IMPORTANT

Direct the air stream at the inside face of the filter only.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 135 136

Keine Kommentare

Shindaiwa EB8520RT Betreibershandbuch Seite 23