SHINDAIWA GRASS TRIMMER TO BRUSHCUTTER CONVERSION KIT FOR T282 GRASS TRIMMERWARNING!Minimize the risk of injury to yourself and others! Read the Owner
10Shoulder Strap NOTE:Although a shoulder strap accessory is not required for use with a grass trimmer, a shoulder strap can increase operator comfor
11WARNING! Before working with a blade-equipped unit, always inspect and clear the area of objects that could interfere with or damage the blade.
ECHO Incorporated.400 Oakwood RoadLake Zurich, IL 60047-1564 U.S.A.Telephone: 1-877-986-7783Fax: 1-847-540-8416www.shindaiwa.com Yamabiko Corporation
2CAUTION!A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent mechanical damage.IMPORTANT!A statement
3Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing informat
4AssemblyRemoving the Existing Cutting Attachment Shield 1. Remove the four socket-head cap screws (A), bracket (B) and two shims (C). 2. Remove th
5Remove Power Head 1. Loosen drive shaft clamping bolt (A).2. Pull outer tube (B) and drive shaft out of power head (C).Remove Throttle Control Hand
6GGHFECECInstall Handlebar Mounting Bracket and Handlebar Assembly1. Remove 2 lower cap screws (A), and remove lower cap (B).2. Place the handlebar
78. Secure plastic ex tubing to outer driveshaft tube using plastic clamps (I) provided. Do not fully tighten plastic clamps until throttle cable a
8Install New Cutting Attachment ShieldGACCDABEAssemble the Cutting Attachment Shield to the Outer Tube.1. Insert the cutting attachment shield (A) be
9IMPORTANT!Discard blades that are bent, warped, cracked, broken or damaged in any way.Use a sharp blade. A dull blade is more likely to snag and thru
Kommentare zu diesen Handbüchern