Shindaiwa M242 Betreibershandbuch PDF herunterladen (Seite 5)

Product Description

M242 Multipurpose

Tool Carrier

Outer Tube

Fuel Tank

Grip

Using the accompanying illustrations as a

guide, familiarize yourself with your unit

and its various components. Understanding

your unit helps ensure top performance,

long service life, and safer operation. See

Figure 2 and 2a.

Handle

Coupler

Throttle

Trigger

Throttle Lockout

Lever

Tank Guard

Figure 2

Ignition

Switch

Air Cleaner

Spark Plug

M23002a

Coupler Screw Knob

Latch

Latch protector

Figure 2a

WARNING!

Do not make unauthorized modica-

tions or alterations to any of these units

or their components.

Prior to Assembly

Before assembling, make sure you have all

the components required for a complete

unit:

 Engine/Outer tube assembly

 Handle

 Kit containing handle mounting bracket

and hardware, this owner’s/operator’s

manual and tool kit for routine mainte-

nance. Tool kits vary by model and may

include a hex wrench, spark plug/screw-

driver combination wrench, and scraper.

Carefully inspect all components for damage.

IMPORTANT!

The terms “left”, “left-hand”, and “LH”;

“right”, “right-hand”, and “RH”; “front” and

“rear” refer to directions as viewed by the

operator during normal operation.

Specications

M242 Multipurpose Tool Carrier dry weight

(less attachments)...........................................................4.3 kg/9.5 lb.

Engine model .............................................................................S242E

Engine type..................................................................2-cycle catalyst

Bore x stroke................................................1.3 x 1.1 in./33 x 28 mm

Displacement ..........................................................1.5 cu. in./23.9 cc

Maximum power............................1 HP/0.8 kW @ 8000 rpm (min

-1

)

Fuel/oil ratio...........50:1 with ISO-L-EGD or JASO FC class 2-cycle

mixing oil*

Fuel tank capacity........................................................21.0 oz./620 ml

Carburetor type..................................Walbro WYK, diaphragm-type

Ignition.............................One-piece electronic transistor-controlled

Spark plug...............................................................................BPMR6A

Speciﬁcations are subject to change without notice.

meets or exceeds these speciﬁcations and is recommended for all

Shindaiwa products.

Air cleaner type.........................Non-reversible foam ﬁlter element

Starting method.........................................................................Recoil

Stopping method..............................................................Slide switch

Transmission type................................Automatic centrifugal clutch

w/bevel gear

EPA Emission Compliance Period*................................Category A

* The EPA emission compliance referred to on the emission compliance label

located on the engine, indicates the number of operating hours for which the

engine has been shown to meet Federal emission requirements. Category

C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours

(Extended).

1 2 3 4 5 6 7 8 9 10 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Shindaiwa M242 Betreibershandbuch Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge Shindaiwa M242