Shindaiwa 78703 Betreibershandbuch

SHINDAIWA OWNER’S/OPERATOR’S MANUALMULTIPURPOSEARTICULATED HEDGE TRIMMER TOOL 78703X750288030210/10WARNING!Minimize the risk of injury to yourself and

10Every 50 hours of operation (more frequently in dusty or dirty conditions):Lubricate the gearcase . To per-form this operation, rst remove the g

11WARNING!The cutter blades are very sharp! Always wear gloves when working around the cutter assembly.CAUTION!Operating the trimmer with worn or impr

ECHO Incorporated.400 Oakwood RoadLake Zurich, IL 60047-1564 U.S.A.Telephone: 1-877-986-7783Fax: 1-847-540-8416www.shindaiwa.com Yamabiko Corporation

2Throughout this manual are special at-tention statements. DANGER!A statement preceded by the trian-gular attention symbol and the word “DANGER” indi

3 WARNING!THE ARTICULATED HEDGE TRIMMER IS NOT INSULATED AGAINST ELECTRICAL SHOCK! Approaching or contacting electrical lines with the trimmer could

4Safety LabelsProduct DescriptionIMPORTANT!The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to direc

5 WARNING!To avoid the chance of serious injury or death, follow these safety precautions during operation:SpecicationsSpecications are subject to

6 WARNING!Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always

7Assembly (continued)Install Blade Stiffener1. Move stop switch to stop position.2. Disconnect spark plug wire. WARNINGHedge clipper blades are

8Assembly (continued)DThe cutter assembly can be adjusted to 10 different positions ranging from 90° to 225° from the outer tube as shown. NOTE:This

9Adjusting cutter assembly for storage or transportation1. With the engine off, install the blade cover onto the blade. 2. Using the procedures desc