Shindaiwa X7502825300 Bedienungsanleitung

C282 BRUSHCUTTERSHINDAIWA OWNER’S/OPERATOR’S MANUALMinimize the risk of injury to yourself and others! Read this manual and familiarize yourself with

10Handling Fuel DANGERFuel is VERY ammable. Use extreme care when mixing, storing or handling or serious personal injury may result.• Use an app

11Starting the EngineIMPORTANT!Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and

12NEVER operate the unit with the cut-ting attachment shield or other protec-tive devices removed!Use only authorized Shindaiwa parts and accessories

13Your Shindaiwa unit may be equipped with one of several Shindaiwa trimmer head models, each with features for spe-cific applications and/or operation

14DO NOT CUTBlade Thrust“Blade thrust” is a sudden sideways or backward motion of the brushcutter. Such motion may occur when the blade jams or catche

15MuferThis unit must never be operated with a faulty or missing spark arrester or muffler. Make sure the muffler is well secured and in good condition

16Air Filter ElementUnscrew FastenerRemove and clean or replace the element10-hour maintenanceCAUTION!Do not operate the unit if the air cleaner or l

17Maintenance (continued)Fuel lter elementHooked wireFuel lter maintenanceRemove and replace the fuel filter element.Before reinstalling the new filte

18Maintenance (continued)WARNING!Sharpen only the cutting teeth of a blade. DO NOT alter the contour of the blade in any way.WARNING!Wear protective g

19IMPORTANT!Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added.Idle a

2The Shindaiwa 282 series is designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety or dura

20Troubleshooting GuideVaporlock.Engine hot/heat soaked.Low fuel quality.Let cool completely and restart.Refi ll with fresh, clean unleaded gasoline wi

21ADDITIONAL PROBLEMSPoor acceleration.Clogged air fi lter.Clogged fuel fi lter.Lean fuel/air mixture.Idle speed set too low.Ignition switch turned off.

22ADDITIONAL PROBLEMSPoor acceleration.Clogged air fi lter.Clogged fuel fi lter.Lean fuel/air mixture.Idle speed set too low.Ignition switch turned off.

23SHINDAIWA LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010ECHO, INC’S RESPONSIBILITYECHO Incorporated’s (ECHO, INC

24PURCHASED REPAIR PARTS AND ACCESSORIES• 90-day all applicationsATTENTION ENGINE POWERED PRODUCT OWNERSThis Shindaiwa engine powered product is a qu

25PURCHASED REPAIR PARTS AND ACCESSORIES• 90-day all applicationsATTENTION ENGINE POWERED PRODUCT OWNERSThis Shindaiwa engine powered product is a qu

26NOTES

27NOTES

ECHO Incorporated.400 Oakwood RoadLake Zurich, IL 60047-1564 U.S.A.Telephone: 1-877-986-7783Fax: 1-847-540-8416www.shindaiwa.com Yamabiko Corporation

3Work SafelyTrimmers and brushcutters operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a pe

4Be Aware of the Working EnvironmentAvoid long-term operation in very hot or very cold weather.Make sure bystanders or observers outside the 15 meter

5Product DescriptionSpecicationsModel Name C282Engine Type 2-cycle catalystDisplacement 28.9 cc / 1.8 cu. in.Bore and Stroke 30 x 35 mm / 1.2 x 1.4

6Outer TubeLower Cap Retaining ScrewsHandlebarStrapLower capHangerMounting the brushcutter handlebarHandle Positioning LabelAssemblyPrior to AssemblyB

74-6 mm Adjust throttle lever free playThe throttle lever free play should be approximately 4-6 mm. Make sure that the throttle lever operates smoothl

8Assembly (continued)NOTE: This unit is shipped with Holder A, Holder B, shaft bolt, and bolt guard installed. The shaft bolt is a LEFT-HAND thread. R

9Assembly (continued)Hex WrenchTighten the assembly (blade not shown for clarity)CAUTION!Install the blade so its printed sur-face is visible to the